Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Glisen_man on October 05, 2013, 07:58:34 pm

Title: GA-78LMT-USB3 ramm support question
Post by: Glisen_man on October 05, 2013, 07:58:34 pm

I have this board and the info on the box(and most websites that sell it) says it only supports upto 1333mhz DDR3 ram
However if you check the official compataibile memory list for the board on the Gigabyte site it says it supports 1600mhz ram at 1600mhz(not downclocked to 1333)

can anyone clarify if 1600mhz will work with this board at its advertised speeds?

Title: Re: GA-78LMT-USB3 ramm support question
Post by: MisterEd on October 06, 2013, 03:18:34 am

The specs and the manual both say to go to GIGABYTE's website for the latest supported memory speeds and memory modules.
If you look at the Memory Support List on the website you will see that the board supports DDR3 1600 memory.

The Memory Support List shows what memory has been tested successfully with the board. It appears that DDR3 1600 appears to work OK.
All you can do is test some good DDR3 1600 memory with similar specs to that shown in the list.

BTW, AMD does not official support DDR3 1600 and higher memory with their CPUs before the AMD FXs.
However a lot of people have had success with older CPUs with DDR3 1600 and higher memory.