Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Agnul on October 08, 2013, 11:49:15 am
-
motherboard gigabyte H87-HD3, version f5 bios, how can I disable the c.i.a.2 ,cpu intelligent accelerator,? (if there is) I ask this because in the video game battlefield 3 and 4 known a particular form of lag (rubber banding) and I read that to remove the problem you should disable c.i.a.2 in bios ... I tried to get into the bios (by pressing del on startll), but I can not find an entry with this name, I find others like C1E or C6/C7 but nn cia2, where is it? other config is: i5-4670, gtx 770 gigabyte (2GB), 8 gigs ram 1600 mhz.
thanks for replys
-
Your board looks like it doesn't have the c.i.a.2. The c.i.a.1 & c.i.a.2 are just auto OC features. Just go in and disable them.
This is from the book. Plus as the NOTE says you CPU might not support c.i.a.2 and that is why the c.i.a.1 is only showing.
Turbo Ratio (1-Core Active~4-Core Active) (Note)
Allows you to set the CPU Turbo ratios for different number of active cores. Auto sets the CPU Turbo ratios
according to the CPU specifications. (Default:Auto)
(Note)
This item is present only when you install a CPU that supports this feature.For more information about
Intel® CPUs' unique features, please visit Intel's website
-
thanks for the reply...SO this f***in rubberbanding is impossible to eliminate
-
If you are only having a problem with this game don't blame the motherboard. If you are having problems with some other games than it could be hardware.
Have you tried any of these from this forum.
http://battlelog.battlefield.com/bf3/forum/threadview/2832654625422234341/