Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: cyber_john on October 11, 2013, 07:00:29 pm

Title: 970A-UD3 ~ Booting "Problem" After Disabling CPB
Post by: cyber_john on October 11, 2013, 07:00:29 pm

Every time I disable the Core Perfomance Boost, the pc shuts down immediately after booting (or restarting) for 2-3 seconds, then boots up normally & everything is fine. This is really frustrating, can u plz fix it with a BIOS update?

There are people who want OCing and this feature must be deactivated, it's unacceptable for me to experience such an issue with each booting. Unless there is a solution in some other option, if there is any help would be appreciated.

Thank you.

Title: Re: 970A-UD3 ~ Booting "Problem" After Disabling CPB
Post by: autotech on October 12, 2013, 03:47:38 pm

I doubt if another bios update is coming out for this board anytime soon if at all. If you have questions about overclocking that board you can use search function of forum to look for other threads that might help you or post in overclocking section.

In order to have a decent overclock you must disable all power saving features as in APM and so on.

Title: Re: 970A-UD3 ~ Booting "Problem" After Disabling CPB
Post by: Vezina on October 20, 2013, 08:14:40 pm

The board is not great.The BIOS has bugs in more aspects.
Use it as it is.
Maybe it s CPU voltage related.Try and adjust that until you find the sweet spot.

Title: Re: 970A-UD3 ~ Booting "Problem" After Disabling CPB
Post by: ftskamins on November 27, 2013, 08:47:21 pm

I have the exact same problem with 990xa-ud3 and fx8350....is there going to be a fix for this?Should i just ignore this slow power ups or something might be harmed from this?