Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: kmsboy on October 30, 2013, 09:56:43 am
-
Hello!
Installed Windows 8.1 RTM is not a long time after the OS is stupor (freezing ) just gets a stake and does not respond to that .
Such as the blue screen does not take off .
But a couple of times it was a mistake CLOCK_WATCHDOG_TIMEOUT.
There is a suspicion that this is a hardware problem .
Motherboard GIGABYTE GA-P55A-UD3R ( revision do not know)
SSD OCZ Vertex 4 128Gb Fw 1.5.1
Processor Intel Core I5 750@2.67Ghz
Version BIOS F13
Made the following - load the default BIOS settings
Changed Advance CPU Core Features -> C3/C6 State Support - Disable
All the drivers are installed with DRP13-R390-Full.
The command bcdedit / set disabledynamictick yes also did not help
If you set the Advance CPU Core Features -> CPU Core Enabled - 1
Everything is working .
Photos of all the settings BIOS https://www.dropbox.com/sh/ryu6pyyo76f0ajn/RL4CPCWOHB
Set all the fixes
Correction (s ): Number of installed patches - 12.
[01 ]: KB2859675_Microsoft-Windows-CameraCodec-Package
[02 ]: KB2883200
[03 ]: KB2884101
[04 ]: KB2884846
[05 ]: KB2886439
[06 ]: KB2889543
[07 ]: KB2894029
[08 ]: KB2894179
[09 ]: KB2895219
[ 10 ]: KB2898742
[ 11 ]: KB2901549
[12 ]: KB2902892
Memtest errors in the memory is not found .
Before that there was a Windows 7 x64, but on HDD - no problems.
I understand that I can try to install Windows 8.1 on the HDD and just figure out there is a problem in the SSD or not, but at the moment I do not want to do it.
Quick Report AIDA64 - https://gist.github.com/anonymous/7d4efe9ef8f17d1b5266
-
Hi kmsboy, ;)
You have :
GA-P55A-UD3R (rev. 2.0)
http://www.gigabyte.com/products/product-page.aspx?pid=3438#ov
or
GA-P55A-UD3R (rev. 1.0)
http://www.gigabyte.com/products/product-page.aspx?pid=3240#ov
Check in the manual:
http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-p55a-ud3p(ud3r)_v2.0_e.pdf
in page 3, for How to find a Revision
The CLOCK_WATCHDOG_TIMEOUT message
arrive during the POST or in BSOD after the POST or during Windows Session ?
When you are in the Windows, session open...
Have you in same time a error code like 0x00000.... ???
Maybe you have this problem with Windows Freeze... because you have installed a non official drivers.
Otherwise, check a drivers in each constructor of material.
Have your read this :
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/system-freeze-randomly-after-installing-windows-8/49488183-26cf-4389-af21-a85dc366c99a
-
GA-P55A-UD3R (rev. 1.0)
http://www.gigabyte.com/products/product-page.aspx?pid=3240#ov
Hangs at the beginning of menu Metro.
The same happens in clean boot mode.