Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: awl67 on November 04, 2013, 10:27:29 am

Title: GA-H87M-D3H Windows 8.1 shows only 2,67GB RAM
Post by: awl67 on November 04, 2013, 10:27:29 am

Hi,

I'm new on the board.

Last week I bought new GA-H87M-D3H rev.1.0, installed new Intel Pentium G3220 processor and new DDR3 4GB/1600 CL11 GR1600D364L11/4G RAM and Windows 8.1 (32-bit) sees 4GB but shows 2,67GB available. What can be cause of that? I know there is an Integrated Graphics Processor which uses shared RAM but I have external Graphics installed. Should I change any settings in BIOS to prevent the RAM shared with other devices?

best regards,
Adam.

Title: Re: GA-H87M-D3H Windows 8.1 shows only 2,67GB RAM
Post by: awl67 on November 06, 2013, 02:39:41 pm

I have installed Windows 8.1 64-bit and it shows 3,88GB of 4GB.

Title: Re: GA-H87M-D3H Windows 8.1 shows only 2,67GB RAM
Post by: dmdilks on November 06, 2013, 04:12:28 pm

Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics
card or the onboard graphics.
IGFX Sets the onboard graphics as the first display.
PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) This set by default
PCIe 2 Slot Sets the graphics card on the PCIEX4 slot as the first display.
PCI Sets the graphics card on the PCI slot as the first display.

Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto) - Disable This

These two I don't know if you can disable them.

Internal Graphics Memory Size
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)

DVMT Total Memory Size
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)