Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: kokka on December 21, 2013, 10:29:25 pm
-
I just put together a new system (specs to follow) but upon powering up I get nothing. No post, no beeps, fans no anything. I checked the power supply and it was missing the -5v, so I switched to a known good power supply. Now the processor fan spins but still no post, no beeps or anything. I've tried moving memory around and using just a single stick. No change. Checked all cables. Even removed the MB from the case to make sure it wasn't grounding out. In reading the forums I read something about maybe the bios needs to be updated to use this processor but since I can't boot or even post I can't do that. Ideas anyone? Thanks!!
GA-Z77X-D3H mother board (rev 1.1)
Intel i7-3770k processor 3.5GHz
Crucial Ballistix Sport 16GB Kit (8GBx2) DDR3 1600 MT/s (PC3-12800) CL9 @1.5V UDIMM 240-Pin Memory BLS2KIT8G3D1609DS1S00
KENTEK 600 Watt 600W Black 12cm 120mm Fan ATX Power Supply 12V SATA 20/24 PIN PCI EXPRESS PCI-E Intel AMD
Rosewill Dual Fans ATX Mid Tower Computer Case FB-03
Seagate Barracuda ES ST3500630NS - Hard drive - 500 GB - internal - 3.5" - SATA-300 - 7200 rpm - buffer: 16 MB
-
You have any other RAM you can try?
Sometimes in compatability issues with Gigabyte motherboards using Crucial Ram.
-
No but I think I will be getting some. Thanks for the reply!!
-
If you can find a two wire speaker for the front bottom left header on the board you should
get bios beep codes to help work out the problem