Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Atul on December 22, 2013, 11:50:14 am
-
Hi,
I assembled one PC for my practice the configuration is below:
Processor : i5 4670
MOBO: GA-Z87D3H
RAM DDR3 16GB/1600 MHTZ CORSIRE
OS: WINDOWS 8 PRO 64 BIT
POWER SUPPLY: 600W
Problem:-
Initially when I started the work on this PC, My display start the flicking. I am using LG's monitor. I called LG support they exchange the monitor after that problem did not resolved. Then I communicated with GIGABYTE support they suggest to upgrade BIOS. I upgraded the BIOS from F6 to F8. Now i am getting on emore problem that BIOS is showing HALF RAM.
Please suggest how I can resolve this problems display flickering and half RAM. I am very irritated from this MOBO.
I will be very thankful of you.
Regards
Atul
-
which graphics output you connect? DVI, D-sub or HDMI? you may try other port to check.
tweak town forum has latest beta bios.
you may try to update to check.
http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios.html
-
Hi,
Thanks for the reply. I am using D-SUB port.
Regarding half issue RAM i have resolved. Please check the below steps which I used.
1. Fetch out all the RAM slots from mother board and check one by one. All were working fine.
2. I did not insert any ram in MOBO and clear the CMOS.
3. Restart the machine without RAM.
4. Plug-off the machine and fitted ram in MOBO.
5. Now BIOS was showing 16GB full RAM :-)
Now from last 2-3 days my PC is working fine. I am testing for flickering problem. If i face again then i come back on this forum..
Thanks again
Regards
Atul