Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Josfur on December 25, 2013, 02:33:26 am

Title: GA-P55-USB3 ram issues
Post by: Josfur on December 25, 2013, 02:33:26 am

Hi guys,

can anyone help me here i just bought 2x ram modules from Crucial

2gb PC3 10600r-9-10-LP CT25672BV1339.1BFF1

I have tried just one and both at the same time but the board keeps beeping when I switch on the computer...  my bios version is F9
Am i doomed to have to go back on the store and have it changed for another ones or is there anything I can do on a software level to change this?


Thanks in advance.

Title: Re: GA-P55-USB3 ram issues
Post by: dmdilks on December 25, 2013, 01:31:34 pm

Is this a new build or a upgrade on the memory?

Title: Re: GA-P55-USB3 ram issues
Post by: Josfur on December 25, 2013, 07:32:19 pm

upgrade in memory only the pc build is the same

Title: Re: GA-P55-USB3 ram issues
Post by: dmdilks on December 26, 2013, 01:52:57 am

Is the memory the same as the other and are you using a memory profile?

Title: Re: GA-P55-USB3 ram issues
Post by: Josfur on December 26, 2013, 02:16:21 pm

Quote from: dmdilks on December 26, 2013, 01:52:57 am

Is the memory the same as the other and are you using a memory profile?

yes both memory modules are the same as the other, I am going to hit the store and see if the guys there provide me with new ones, I am taking the QVL list with me just in case they decide to help me out.

the shop was closed today .... ok here is the memory module (2x) I bought
http://www.computervalley.ca/ct25672bv1339/649528745194/crucial-2gb-ddr3-sdram-memory-module-2-gb-ddr3-sdram-1333-mhz-ddr3-1333/pc3-10600-ecc-registered-240-pin-dimm#!prettyphoto/0/

is there anything I can do to make it work with my motherboard?

Title: Re: GA-P55-USB3 ram issues
Post by: Josfur on December 27, 2013, 02:10:00 am

to close this topic. the Gigabyte motherboard GA-P55-USB3 does not support ECC ram modules only NON-ECC.