Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: under1989 on January 07, 2014, 03:45:54 pm

Title: after bios update something wrong startup .Is it dangerous?
Post by: under1989 on January 07, 2014, 03:45:54 pm

hi .I  update bios. instal beta and something wrong startup  ??? .Is it dangerous? .
 http://www.youtube.com/watch?v=RiKZ4-NXkvM

Title: Re: after bios update something wrong startup .Is it dangerous?
Post by: dmdilks on January 07, 2014, 04:45:02 pm

The reason I'm asking you this I'm old school. After you updated the bios what did you do?

Did you shut down the computer and turn the power off? Did you clear the cmos and pull the battery?

Did at lease go in and set it to the default settings? Plus this is the big one why did update the bios?  Because it was there and you could.

Title: Re: after bios update something wrong startup .Is it dangerous?
Post by: under1989 on January 07, 2014, 04:56:08 pm

The first time I had this problem

Can't enter bios after installing new graphics card and beeps when start up(gpu NVIDIA Quadro K4000)

CPU:I7 3770 k
MoBo:Z68XP-UD3
GPU:NVIDIA Quadro K4000
RAM:corsair 4X4
HDD:Samsung 1TB
PSU:Corsair HX 850
SSD:Corsair force GT

OLD GPU EVERISING GOOD (Radeon HD6870 2X)




I remove the card and put old Radeon HD 6870.everything works fine.only new card has problem



1.When i put gpu:nvidia quadro k4000 after that i remove battery two minutes from my motherboard . remove the ram and clean it. turn on computer .start motherboard icon but not enter bios and after 3 minutes Computer Has a Black Screen)windows not start up :heink:

2.I put gpu:Radeon HD6870 .everything works fine :)
BIOS PICTURE http://postimg.org/gallery/25r94so6c/
COMPUTER MANAGEMENT http://imageshack.com/a/img824/7417/j74h.jpg

3.Aafter that put quadro k4000 . start motherboard icon, not enter bios but start windows:??:  http://www.youtube.com/watch?v=Hj0wDqyroHg






         after bios update graphics card work fine but something wrong sturtup (beta bios)
http://www.youtube.com/watch?v=RiKZ4-NXkvM&feature=yout...

    Reply to under 1989

Title: Re: after bios update something wrong startup .Is it dangerous?
Post by: under1989 on January 07, 2014, 05:09:33 pm

When I first tried to update the old BIOS:

model name: z68xp-UD3
Bios version : U1g
BIOS data: 07/11/2012

NEW BIOS
Bios version : F10
BIOS data: 2012/03/21 I thought that was NEW  :-[
may be mistaken revision number? I forgot)setup did not start I have black screen AND I RESTART IT.
The second time I tried to update the BIOS --

NEW
Bios version : U1J(UEFI BIOS)
Date :2013/03/06
(Bios 2013 BETA Correct rev1.3) Good End but if i Choose in Bios (exit without saving) i see the point windows 7 start up---- http://www.youtube.com/watch?v=RiKZ4-NXkvM
sorry my bad english

CPU:I7 3770 k
MoBo:GA-Z68XP-UD3 (rev. 1.3)
GPU:NVIDIA Quadro K4000
RAM:corsair 4X4
HDD:Samsung 1TB
PSU:Corsair HX 850
SSD:Corsair force GT

new Bios Version : U1J(UEFI BIOS)
Date :2013/03/06

Title: Re: after bios update something wrong startup .Is it dangerous?
Post by: dmdilks on January 07, 2014, 06:21:32 pm

Here read this thread the OP did a really good job on that board.

http://forum.giga-byte.co.uk/index.php/topic,13818.0.html

Title: Re: after bios update something wrong startup .Is it dangerous?
Post by: under1989 on January 07, 2014, 06:26:48 pm

thank you very much dmdilks