Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Slystash on January 22, 2014, 05:09:55 pm

Title: 990fxa-UD3 Slow SATA Ports?
Post by: Slystash on January 22, 2014, 05:09:55 pm

Hello,

I recently benchmarked my 990fxa-UD3 with Pyro SE SSD with HD Tune Pro and it's reporting back with a reading of ~230MB/s. That's way below what it's supposed to be performing at.

My BIOS settings are at SATA III and AHCI activated. I also checked my registry within windows 7 and it's specifying that AHCI is on via the generic MS AHCI driver.

Any thoughts as to what i should try?

Title: Re: 990fxa-UD3 Slow SATA Ports?
Post by: autotech on January 22, 2014, 11:31:20 pm

you can try following this and see if it helps.

http://forum.corsair.com/forums/showthread.php?t=82516

Title: Re: 990fxa-UD3 Slow SATA Ports?
Post by: AgentFXA on January 24, 2014, 08:36:58 am

Looks to me your SSD is on the slow side:

http://ssd.userbenchmark.com/SpeedTest/1854/Patriot-Pyro-SE

while read speed looks good the write speed is appalling hence your score is about right