Official GIGABYTE Forum
		Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: ricco59163 on January 23, 2014, 06:50:35 am
		
			
			- 
				My problem is the following 
When I put my GTX770 bios on a F12W up a Bios F12y the "Legacy Only" does not work, it does not detect my graphics card 
With Bios F12L there is no problem, the pc running smoothly. 
I want to access the bios f12y for my G.Skill 2400 Mhz work properly. 
When I put a 4300 series AMD, there s any problem detection "Legacy Only" 
I'm using Win7 64bit, I did not need UEFI
			 
			
			- 
				The problem is that when you set the bios to legacy that card will not boot. That card is a UEFI card and that is why you need it set to UEFI.
If you want to run the 4300 series card you should have it set to legacy. All GTX-700 series are UEFI.
			 
			
			- 
				with Bios F12y 
1 I used the card for 4300 series access bios 
2  Then I put in Legacy Mode 
3 I backup the BIOS 
3  I put my GTX770 
4 I boot 
5  but it does not work, windows 7 64 bit does not work. 
will it be possible to have a F12Y Bios Legacy default mode? 
			 
			
			- 
				With Bios F12L 
I note with the same manipulation I get to run my GTX770 card under Win 7 64 Bit in Legacy mode
			 
			
			- 
				http://www.tomshardware.co.uk/answers/id-1728575/victim-gtx-770-booting-windows.html#. ( same probleme of me )
			
 
			
			- 
				When you setup the bios do you have it set to EFI or Legacy. Plus have you tried it both ways too.
			
 
			
			- 
				I have set Legacy , but when I put GTX , the set up switch to UEFI ???
			
 
			
			- 
				can you give me a bios modded with juste Legacy mode ?
			
 
			
			- 
				this morning , with bios F12y ...
I have put 
in pci-e1 the amd series 4300
in pci-e2 the GTX770
I have set priority Pci-e2 in bios in legacy mode
the Motherbord boot to the first Pcie  ???
witch difference betwin the F12l and the F12y ???
			 
			
			- 
				If you getting the Bios from Tweaktown ask them. Plus if the 770 card runs on F12y in the EFI mode why do you want it to run Legacy? 
I don't understand what you are trying to do. If you trying to use one of these cards for Nvidia PhysX Memory than you have the cards backwards.
http://www.youtube.com/watch?v=cbww3dhzK0M
			 
			
			- 
				I have a G.skill 2400Mhz , only F12y can run correctly my DDR3.
My config : 
http://valid.canardpc.com/q10q3y (http://valid.canardpc.com/q10q3y)
I have Try F12y with AMD series 4300 and the XMP run correctly at 2400mhz 
			 
			
			- 
				nothing ?
			
 
			
			- 
				G1 assassin 2 bios F12s the best bios for this MotherBoard ;) , I have test all beta bios !