Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: ElGatoSP on February 05, 2014, 06:41:34 pm

Title: GA-Z87M-D3H not start with Intel X520 10Gb card
Post by: ElGatoSP on February 05, 2014, 06:41:34 pm

I´m traing to intall an Intel X520 10Gb card, but the mother is not starting when I install the card on any of the 2 Pci-e slots. The Mother has the last firmware F9. Could be possible to make it works? maybe changing the BIOS setup?

Thanks

Title: Re: GA-Z87M-D3H not start with Intel X520 10Gb card
Post by: dmdilks on February 06, 2014, 12:42:47 am

What OS are you running? You have to change those slots to legacy.

Title: Re: GA-Z87M-D3H not start with Intel X520 10Gb card
Post by: ElGatoSP on February 06, 2014, 03:20:15 pm

The OS will be a linux, I want ton make this computer a NAS server, so I will use Debian 9  tihnk so...
Did you know how to set up all the PCI to legacy mode?
I forced to 2.0 from 3.0 and didn´t work.
I installed a PCI-e 1X ethernet card in the 16x slot and worked, the problem is with this card. The card is working fine in another mother with x8 slot, need to test in a x16 slot yet.