Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Kimmelim on February 13, 2014, 03:40:22 am

Title: backup bios fail ga-970a-ud3 rev 1.2
Post by: Kimmelim on February 13, 2014, 03:40:22 am

Hi. Wanted to update my bios from F4 to F7 from webside.
Than went into Q-Flash the new bios and it was a Pass;)
And boot'ed the pc og right before win7 is starting, a short sec with
Bluescreen show up and the pc is rebooting.. This happens all
the time.

So i thougth it dosen't work. Started the Q-Flash again and
reinstalled the backup file. And still the pc is rebooting
at the same spot.. What do i need to do to make my backup file work proper again??

Sorry for bad english.

Title: Re: backup bios fail ga-970a-ud3 rev 1.2
Post by: autotech on February 14, 2014, 03:22:12 pm

Reset your bios take the battery out for about 10 minutes and try that it does help sometimes. When you flash bios check the box that says clear DMI pool.

Title: Re: backup bios fail ga-970a-ud3 rev 1.2
Post by: Vezina on February 14, 2014, 10:57:07 pm

There could be some RAM problems ,maybe incompatibilities or defective.Change RAM see what happens.