Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: newboy on April 02, 2014, 05:09:59 pm
-
Hi i need help please have just replaced a GA P67-D3-B3 motherboard.
New board is a GA H77-D3H everything works fine except for one thing.
When computer is turned of switching on the modem turns the computer on have had a look in the uefi but cannot find any settings to alter this.
With the old board there was a setting for (wake on lan) but cannot find this in the uefi of the new board.
Thanks in advance for any help
-
Peripherals
LAN PXE Boot Option ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default:
Disabled)
Power Management
ErP
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:
Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
-
Hi just had a look in the settings for Power Management ERP was disabled have set to enabled now it is enabled the PME event/mouse/keyboard wake settings are greyed out.
There is no wake on LAN setting whether ERP is enabled or disabled.
Had a look in Peripherals there is no LAN PXE boot option.
Just had a look in the handbook for motherboard and it does show the option LAN PXE boot as being in the Peripherals section but this option does not show in settings for my board.
The handbook is generic to Z77 H77 perhaps this setting is only available on the Z77.
There is a setting in Bios Features titled PXE boot option.
Sorry to be a bother but this is my first UEFI board.