Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: vbgunltd on April 07, 2014, 07:28:36 pm
-
I've read that the AMD A-10-7850 Visheri CPU needs the F5c BIOS version on the GA-F2A88x-UD4 mobo to work.
How can you tell the BIOS version if the PC won't post?
???
-
get a CPU supported by the first bios version and then update it. If it wont post you cant tell what bios is on it.
-
download the trial version of Aida64 Extreme, you'll get bios version in the Motherboard/Bios section Ignore, if your not getting past the post then you won't be running anything else ::)
-
I purchased this motherboard (GA-F2A88X-UP4, rev. 3) and had the seller (MicroCenter) install the AMD A-10-7850K CPU, 8GB RAM and post the board.
Everything went well and I returned home to complete the build of my new pc. The BIOS on the board was version F4.
I installed all of the drivers on the mgf. disk after installing Win 7 Pro 64 bit OS. One problem I had was none of the USB 3 ports worked.
After digging around I found the new USB 3.0 driver on Gigabyte's website (mb_driver_usb_fm2-plus_exe) downloaded and installed it.
Now all of the USB 3.0 ports function.
My system is up and running with Win XP virtulization as well.
-
In windows go to the start button and click on programs / Accessories / system tools / system information. In the system information it show you the make , version and date of the bios.
-
In windows go to the start button and click on programs / Accessories / system tools / system information. In the system information it show you the make , version and date of the bios.
Which, as already stated, is only good if the board will post.
Having said this, if the board will post, it will show you then what the bios version is
-
Having said this, if the board will post, it will show you then what the bios version is
Yes it does show you that when you first boot. But only after you have change it to the bios info screen from the MB logo screen. It doesn't show you that info on the MB logo screen.
-
Having said this, if the board will post, it will show you then what the bios version is
Yes it does show you that when you first boot. But only after you have change it to the bios info screen from the MB logo screen. It doesn't show you that info on the MB logo screen.
Yes, cos it is so hard pressing Tab or Escape to see the info...