Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: dahai3468 on April 27, 2014, 10:48:22 am

Title: How to set the fast boot on 970a-ds3
Post by: dahai3468 on April 27, 2014, 10:48:22 am

Hi
How to set the fast boot

970a-ds3
fx-6300
msi 7870

Title: Re: How to set the fast boot on 970a-ds3
Post by: jorgecorazondeleon on April 27, 2014, 02:02:00 pm

Hi:
Is revision 3.0?
Only rev 3.0 is UEFI

Title: Re: How to set the fast boot on 970a-ds3
Post by: dahai3468 on April 27, 2014, 03:40:39 pm

yes

Title: Re: How to set the fast boot on 970a-ds3
Post by: jorgecorazondeleon on April 27, 2014, 09:29:47 pm

The only way is to do a clean install
1.-Only with original DVD, not usb
2.-All UEFI mode in bios
3.-Booting with DVD in
4.-Delete partition (1 only) .
5.--Press: ALT + F10
6.-In DOS: push: Diskpart
Select  Disk 0
Clean
Exit
7.-Push refresh, check out no error message
8 - Choose new partition, with the total (3 partitions will be formed)
9.-Install
Note: the video card should be UEFi

Title: Re: How to set the fast boot on 970a-ds3
Post by: dahai3468 on April 28, 2014, 02:43:26 pm

no fast boot in bios？

Title: Re: How to set the fast boot on 970a-ds3
Post by: dmdilks on April 29, 2014, 02:04:55 am

Quote from: dahai3468 on April 28, 2014, 02:43:26 pm

no fast boot in bios？

The answer is NO. The only way you will get it to fast boot if you are installing windows 8. Plus the way he is telling you how to do it.

Windows 7 doesn't really use UEFI. Where windows 8 does.