Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: geoozzie on July 23, 2014, 05:05:32 pm
-
Hello guys, im after a guide to upgrade my bios to uefi im having issues instaling xp.... atm i will appreciate if someone could link me a good detailed guide with bios settings and windows settings as well.
i do have windows xp-pro but it seems something is locked and they cant get installed,
thanks in advance for any help
-
I have never tried UEFI on xp. I think windows 7 is what is needed or newer. I might be wrong if so someone please correct me.
-
the unlock tb+2 uefi update is asking for 32+64 xp drivers
-
If you want to run UEFI you need a new board that board doesn't have UEFI. Sa far as I know none of the EX58 board support UEFI
-
say's who? they not supported? http://www.gigabyte.com/press-center/news-page.aspx?nid=1002 my board is right side 2nd one from the top
mb_utility_3tb_unlock_f6.exe
mb_utility_3tb_unlock.exe
-
All they are saying is that Utility will unlock the board to run 3 tb hard drives with Windows XP . It will not make your board UEFI.
-
3TB+ Unlock Preinstall driver
(Note) Support Intel Z68/X58/P67/H67 series and AMD 900/800 series MB.
(Note) Press F6 during Windows setup to read from floppy.
(Note) After installing the operating system, if your system keeps rebooting automatically, refer to the following recommended solutions.
1. Recover your Windows operating system with the Automated System Recovery function. Boot from the Windows Setup disk. When prompted with the message "Press F2 to run Automated System Recovery (ASR)", press F2 to run ASR.
2. Connect your hard drive to another SATA port.
-
ok thanks mate,
btw i thought the tb+unlock was uefi.....but i will get another one give me any suggestions please and this thread is done