Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: pendaws on August 31, 2014, 01:26:50 pm
-
I recently purchased 2 BRAND new Kingston SSD 120gb drives and have decided to do a Raid 0 install of Win 7 ULT.
There was NO problem at all installing but the bentch marks for the array are abysmal, lee than a single drive on it's own.
I had an issue with NEW memory I put in the machine,I couldn't access the BIOS with it in.I sent a question to GB and was sent back an answer as to why I couldn't (maybe) and they gave me a NEW Bios file and so I added it. I can now access the BIOS but, the bootup has slowed and the results of the AS SSD test shows the speeds have slowed.
I hope that someone can help? I surely don't need to RE INSTALL? I did notice that the RAID module of the BIOS had been updated also.
-
Where do you have your SSD connected to white or blue? The white are Gsata 3gb the blue are Intel sata 6gb.
-
Well, this is an AMD board and I used two of the 6 sata 3 ports for the raid. Today I made an image of the drive and changed the stripe size from 64K to 128K (these are the ONLY 2 settings allowed) and that made the whole thing WORSE. I guess that I won't be getting any better performance from this setup.
-
I have a single drive and this is mine. You could have a bad SSD or are you using sata 3 cable?
(http://i444.photobucket.com/albums/qq161/dmdilks/as-ssd-bench_zps70b305f2.png)
-
Sorry I didn't post back soon I just remember about this thread. I since have setup array and this is the score I got with two 240 gb SSD.
(http://i444.photobucket.com/albums/qq161/dmdilks/SSDTest_zps0a74bc19.png)