Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: mustafa on September 19, 2014, 02:56:20 pm

Title: ga x58a ud3r couldn't boot
Post by: mustafa on September 19, 2014, 02:56:20 pm

Hi,

I have a ga x58a ud3r mother board, I using about 5 years.

But, now I have a problem, when I switch on the computer all led light about every 1 second and then all led off again on the board, it's look like a loop.

Also all fan running every 1 second like led and then off.

Thanks your helps.

Title: Re: ga x58a ud3r couldn't boot
Post by: autotech on September 20, 2014, 03:26:48 am

Have you tried clearing the cmos?  If that didn't help try a new power supply.

You can run memtest to make sure your ram isn't throwing errors.

Title: Re: ga x58a ud3r couldn't boot
Post by: mustafa on October 31, 2014, 09:29:22 am

How I can clear CMOS ? Does  unplug the battery is enough for the clear CMOS ?

If yes, I tried but, result is same.

Thanks.

Title: Re: ga x58a ud3r couldn't boot
Post by: autotech on October 31, 2014, 11:11:11 am

That would work. Do you have a PSU you could try to rule that part out. Sounds like a PSU or motherboard problem. More power supply than anything else