Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Amorelia on October 16, 2014, 05:47:56 am

Title: BIOS Question
Post by: Amorelia on October 16, 2014, 05:47:56 am

Hi, can anyone point to a resource which outlines what the different BIOS revisions do?

I have a Sniper M3.  BIOS version F3.  Works fine with my EVGA GTX670, but when I replace that with a Gigabyte GTX970, it hangs at the POST screen.  I have 2 of the GTX970s, both do the same thing,  so am not suspecting a DOA GPU.

EVGA back in, works fine again.  So I look to the MB BIOS. F9 is the latest release,  with F10f as a Beta. A very old Beta, but still a Beta.

So I don't know which one to flash. I suppose I could try version F9, see if that works.

Thoughts?

Title: Re: BIOS Question
Post by: ex58 on October 16, 2014, 09:39:06 am

Try F10f.....if same, ask GB Technical Support for BIOS update regarding GTX970 video cards.

Title: Re: BIOS Question
Post by: Amorelia on October 17, 2014, 08:35:21 am

Flashing motherboard BIOS  to F10f fixed it.

Thanks,

Title: Re: BIOS Question
Post by: ex58 on October 17, 2014, 09:15:48 am

Good to know.... ;D

Title: Re: BIOS Question
Post by: magnoblade on October 18, 2014, 03:29:35 pm

I have a ga-z77x-ud3h rev 1.0 mobo with an f9 bios and currently running a evga gtx 660ti. I have bought a evga 970 then proceeded to install it and now it hangs just at my bios splash screen and the post code i notice on my mobo is a 62. so will updating my bios to f20e fix it or what bios should i update too as f20e is a beta bios.