Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: magnoblade on October 19, 2014, 04:29:01 am
-
I have a ga-z77x-ud3h rev 1.0 mobo with an f9 bios and currently running a evga gtx 660ti. I have bought a evga 970 then proceeded to install it and now it hangs just at my bios splash screen and the post code i notice on my mobo is a 62. so will updating my bios to f20e fix it or what bios should i update too as f20e is a beta bios.
-
Just update (flash) to latest BIOS posted on GB web page.
-
Could you put up some more spec. Just telling us what board you have will not help.
-
Had the same problem with my z77x ud5h. Looked around and found an answer: you need to update to a bios that has "Improve VGA compatibility" or any above it. After that it booted without any single issues. One more thing: if you leave your pc alone on the splash screen it will still boot eventually, just take a long ass time. Your best bet is to take out the 970, put in whatever gpu you had before to flash and then put in your 970.
-
Had the same problem with my z77x ud5h. Looked around and found an answer: you need to update to a bios that has "Improve VGA compatibility" or any above it. After that it booted without any single issues. One more thing: if you leave your pc alone on the splash screen it will still boot eventually, just take a long ass time. Your best bet is to take out the 970, put in whatever gpu you had before to flash and then put in your 970.
Yeah after abour 10 mins it goes to a black screen with a fast flashing cursor but then nothing after that but i will be flashing my bios to f18 hopefuly that will fix this
-
updated to f18 and my 970 works! thank you to those who actually gave an answer.