Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: bartje885 on December 03, 2014, 11:20:40 am

Title: GA-Z97-HD3: RAID failed after update from F4 to F5
Post by: bartje885 on December 03, 2014, 11:20:40 am

Hello guys,

I did a bios update from F4 to F5 and after the flash I noticed that my raid array was gone. I went to the bios settings and noticed that the settings were factory reset. I did configured the sata configuration back to raid but this resulted in a Failed Raid Array (the screen to choose for Control+I)

Can somebody help me please?

Title: Re: GA-Z97-HD3: RAID failed after update from F4 to F5
Post by: autotech on December 03, 2014, 11:32:38 am

go back to where you build raid and make sure it is healthy. Use windows disk to do a start up repair, if none of that work you might have to rebuild it.