Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Rednecktech on December 06, 2014, 11:32:14 pm

Title: GA-870A-UD3 rev 3.1 board with a fx6300 black edition processor
Post by: Rednecktech on December 06, 2014, 11:32:14 pm

When i installed the new processor i got nothing. No hard drive no monitor. but did get the fans to turn and the network card to light up. Is it possible to use this chip or did i waste money?

Title: Re: GA-870A-UD3 rev 3.1 board with a fx6300 black edition processor
Post by: dmdilks on December 07, 2014, 08:42:16 pm

Your CPU isn't in the list.

AMD   FX-8140   3200MHz   1MBx8   8MB   Bulldozer   32nm   B2   95W   5200   FEf
AMD   FX-8120   3100MHz   1MBx8   8MB   Bulldozer   32nm   B2   95W   5200   FEf
AMD   FX-8100   2800MHz   1MBx8   8MB   Bulldozer   32nm   B2   95W   5200   FEf
AMD   FX-6200   3800MHz   1MBx6   8MB   Bulldozer   32nm   B2   125W   5200   FEf
AMD   FX-6120   3500MHz   1MBx6   8MB   Bulldozer   32nm   B2   95W   5200   FEf
AMD   FX-6100   3300MHz   1MBx6   8MB   Bulldozer   32nm   B2   95W   5200   FEf
AMD   FX-4170   4200MHz   1MBx4   8MB   Bulldozer   32nm   B2   125W   5200   FEf
AMD   FX-4150   3900MHz   1MBx4   8MB   Bulldozer   32nm   B2   95W   5200   FEf
AMD   FX-4130   3800MHz   1MBx4   4MB   Bulldozer   32nm   B2   125W   5200   FEf
AMD   FX-4100   3600MHz   1MBx4   8MB   Bulldozer   32nm   B2   95W   5200   FEf