Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => X99 Motherboards => Topic started by: lynx4567 on December 21, 2014, 11:47:20 am
-
Attached a pc speaker to my non working ud4 motherboard, and i get continuous short beeps (maybe 15 or so before it dies)
What would this mean ?
-
How much memory and what slots do you have them in. Plus make sure they are seated right. If you have one that isn't seated right it will not boot.
1 - stick slot 3
2 - sticks slot 3 & 7
4 - sticks Slot 1, 3, 7, & 5
-
How much memory and what slots do you have them in. Plus make sure they are seated right. If you have one that isn't seated right it will not boot.
1 - stick slot 3
2 - sticks slot 3 & 7
4 - sticks Slot 1, 3, 7, & 5
Just one stick and it's in slot 3..
Is this a memory problem you reckon ?
-
Actually you were right about the beeps, the ram wasn't seated properly.
thanks