Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: jake44264 on January 11, 2015, 11:07:27 am

Title: no signal when i plug in my graphics card to my mother board
Post by: jake44264 on January 11, 2015, 11:07:27 am

Hi, i have a graphics card (xfx R9 280X Black Edition) and when i put it in to your mother board and put it on it says no signal. i have the latest bios, the graphics card works in a different pc, the psu is 850w, i tried a different power supply and i got the same problem. i don't know if there is a problem with the mother board or i have to do something in the bios.

Edit: i contacted Gigabyte using esupport and they said:

"Press DEL get into BIOS --> move to BIOS Features Setup --> Change the PCI ROM Priority to Legacy (default is EFI Compatible ROM) --> Save the setting and reboot.

Please check if your graphics card need VGA BIOS update for UEFI compliant mode."

I tried that but i still get no signal, i have tried 2 Hdmi's & 1 Dvi cable into my R9 280X black edition, i think there is something else what i have to do in the bios.

Specs:
Intel i5 3.20Ghz
8GB of ddr3 ram
Gigabyte GA-H61M-DS2 DVI Motherboard
xfx R9 280x Black Edition Graphics card
Artic blue + 850w
 

Title: Re: no signal when i plug in my graphics card to my mother board
Post by: autotech on January 11, 2015, 08:13:00 pm

Which revision of motherboard do you have. If it is rev 1.0 I can see where it would have trouble with that card but rev 2.0 and 2.1 should do just fine on it.

After looking at online reviews it seems others are have problems with that board also.

Title: Re: no signal when i plug in my graphics card to my mother board
Post by: rajakjak on June 25, 2016, 07:55:52 am

i have the same problem with you man, i hope someone gives us a solution :(

Title: Re: no signal when i plug in my graphics card to my mother board
Post by: sygnus21 on June 27, 2016, 11:10:35 pm

Quote from: rajakjak on June 25, 2016, 07:55:52 am

i have the same problem with you man, i hope someone gives us a solution :(

It would help if you gave us your system specs. Particularly motherboard model, GPU (Make & model).

And, as a just in case.... double check the BIOS to see if enabling CSM  helps (for now).  In addition, make sure your monitor is plugged into the card you want to use.  Example: if you want to use the HD graphics off the CPU, you'd connect your monitor to the motherboard's GPU. If you want to use say your dedicate AMD/NVidia graphics card, plug your monitor there.

Le us know.