Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: bomboy2121 on January 30, 2015, 10:23:59 pm
-
so i got cm devastor mouse and GA-H61M-D2P-B3 motherboard
and i noticed that my mouse wont turn off after i turn off my pc
i found that this motherboard can charge phones when his off so thats probbaly the case
but i cant find the drivers or any manul about it
can someone explain to me what i need to do so the led light of my mouse will be off when i turn off my computer?
-
They could be a setting in the bios you could turn off.
-
If you installed all the software in auto mode from the disk it could have installed ON/OFF Charge. Go to control panel and see if the that driver was installed in programs & features.
I look at the book. There is nothing in there that shows anything that you disabled for that.
Unique Features Support for @BIOS
Support for Q-Flash
Support for Xpress BIOS Rescue
Support for Download Center
Support for Xpress Install
Support for Xpress Recovery2
Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
Support for Smart 6™
Support for Auto Green
Support for ON/OFF Charge
Support for Cloud OC
Support for Q-Share
-
If you installed all the software in auto mode from the disk it could have installed ON/OFF Charge. Go to control panel and see if the that driver was installed in programs & features.
I look at the book. There is nothing in there that shows anything that you disabled for that.
Unique Features Support for @BIOS
Support for Q-Flash
Support for Xpress BIOS Rescue
Support for Download Center
Support for Xpress Install
Support for Xpress Recovery2
Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
Support for Smart 6™
Support for Auto Green
Support for ON/OFF Charge
Support for Cloud OC
Support for Q-Share
i got this program but thats what happens when i use it
http://i.imgur.com/cWfoL5n.jpg the program
what happens when i press install http://i.imgur.com/98Xohfm.jpg
http://i.imgur.com/5rJffce.png what happens when i press yes
any help?or any drivers the DOES work?
-
On OFF charge is great BUT I have never installed it and my usb still charges when computer is off so there is something in the motherboard a chip perhaps or something that still allows this.
Put you mouse in a USB3 port if you have one and see if that helps it is what I did to my mouse to turn off the led. As far as that program I don't know as I said I have never installed it.
-
On OFF charge is great BUT I have never installed it and my usb still charges when computer is off so there is something in the motherboard a chip perhaps or something that still allows this.
Put you mouse in a USB3 port if you have one and see if that helps it is what I did to my mouse to turn off the led. As far as that program I don't know as I said I have never installed it.
i got only usb 2.o ports....
-
Please make sure ErP support under Power Management is set as enabled in BIOS.
-
Please make sure ErP support under Power Management is set as enabled in BIOS.
thanks! that fixed the problem!!
case closed and thanks for all of you for the help
for anyone who found this topic and have the same issue like me
1:go to bios
2:under power mangement, enable erp support and done!
-
My ErP support is disabled and I don't have that problem so I am sure ther is something else adding to that problem. I am glad it fixed it for you though.
-
My mouse turns off with the pc but if you move it after shutdown it lights up again. I just unplug it.
I'll try the ErP setting in bios. Thanks for the tip.