Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: geerboy on April 04, 2015, 09:33:27 pm

Title: Z97X-UD7 TH Post Code help
Post by: geerboy on April 04, 2015, 09:33:27 pm

Hey guys, just got a new Gigabyte Z97X UD7 TH motherboard.  I got everything built OK, but I noticed when I boot up, the post code LED says '6E'.  With previous motherboards I've owned, it typically says 'FF' or 'A0' instead on normal boot so this seems kind of odd.

That said, it seems to be booting Windows normally so it's probably not a big deal. But I just want to see if this is normal behavior or not just in case something is not right. :)

Intel i7 4790K, Gigabyte Z97X-UD7 TH, G.Skill Trident X 16GB DDR3-2400 MHz, 2x EVGA GTX780 SLI, Creative SB ZxR, SanDisk Extreme Pro 480GB, 2x WD Black 2TB, LG 16x BD-RW, EVGA SuperNova 850G2.

Title: Re: Z97X-UD7 TH Post Code help
Post by: dmdilks on April 05, 2015, 01:05:58 pm

The codes should be in the back of your book "6B~6F Reserved". All I can say try and reset the bios. Only set the stuff you need to boot the computer. Plus don't forget to check time & date after you reset it. You might have something turn on that it is looking for.