Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: skysis on May 26, 2015, 03:11:41 am

Title: GA-X58A-UD5 (rev. 2.0) + Samsung EVO SSD 1GB drive
Post by: skysis on May 26, 2015, 03:11:41 am
Does anyone here have experience installing a SSD with this motherboard.? What setting should I enable in BIOS?
I also hear that The Marvel controller on this motherboard is pretty poor: it's speed ids lower than SATA 2 and it does not support TRIM. Should I use the intel SATA ports instead?
Thanks!!
Title: Re: GA-X58A-UD5 (rev. 2.0) + Samsung EVO SSD 1GB drive
Post by: autotech on May 29, 2015, 01:51:16 am
Yes intel controller. AHCI if it is in bios otherwise use sata.
Title: Re: GA-X58A-UD5 (rev. 2.0) + Samsung EVO SSD 1GB drive
Post by: Carvetii on July 21, 2015, 01:54:59 am
Does anyone here have experience installing a SSD with this motherboard.? What setting should I enable in BIOS?
I also hear that The Marvel controller on this motherboard is pretty poor: it's speed ids lower than SATA 2 and it does not support TRIM. Should I use the intel SATA ports instead?
Thanks!!
Gigabyte's Marvel driver is out out date..check this out..
http://forum.corsair.com/v3/showthread.php?t=105221

https://downloadcenter.intel.com/download/21026/RAID-Marvell-SATA-Driver
Title: Re: GA-X58A-UD5 (rev. 2.0) + Samsung EVO SSD 1GB drive
Post by: namuk on August 08, 2015, 08:51:43 pm
use intel controller only for ssd :)