Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: spluff on August 03, 2015, 07:56:11 am

Title: GA-Z77X-UD3H Via USB
Post by: spluff on August 03, 2015, 07:56:11 am

Hi all,

I hope some one can help me please..

When I did an upgrade the Via USB worked okay...  I needed to clean install and its not working...

 I have tried installing the Win8.1 / Win8 and Win7 drivers and none of them work...

The initial error is with Usb xHCI Compliant host controller - when installed that is okay but then I get an error with the USB Hub (Code 10)

Can someone please help - will windows 10 drivers be available soon for this?

Thanks

Title: Re: GA-Z77X-UD3H Via USB
Post by: dmdilks on August 03, 2015, 02:38:16 pm

What USB driver are you trying to install. Is it USB 3.0? That driver should be on you Motherboard disk. USB 2 works without drivers till windows loads and updates them. Yes windows 10 does load USB 3.0 drivers.

Title: Re: GA-Z77X-UD3H Via USB
Post by: spluff on August 03, 2015, 04:10:03 pm

I used the motherboard drivers from the gigabyte website

The VIA ports did not work at all when first going into windows with error in device manager... (USB2 or USB3)

I have tried the Windows 8.1 64bit (4.20), Windows 8 64bit (6.1.7600.2108) and Windows 7 64bit (6.1.7600.2108)....

Any ideas?

Title: Re: GA-Z77X-UD3H Via USB
Post by: dmdilks on August 03, 2015, 04:56:20 pm

What OS are you using? If it is ten there are going to be bugs. If it is ten I don't what to tell. Here is link to your drivers.

http://www.gigabyte.com/products/product-page.aspx?pid=4153#dl

Title: Re: GA-Z77X-UD3H Via USB
Post by: spluff on August 04, 2015, 09:24:39 am

OK I will post this to help others with this motherboard :)

I upgraded to the latest bios and it fixed the problem with the standard Microsoft drivers