Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: cmccarter on November 08, 2015, 12:27:56 am
-
Could use a little help. I am on my second J1900 MB and am unable to get any video output from either of 2 boards. I am using a known good monitor (works with another PC), I have tried 2 different VGA cables (bothwork with another PC), also tried a known good DVI cable. I am not even able to see the boot up sequence. using a IN WIN BP655 case. all power is connected and memory is plugged into dimm1 slot. If I have to send this back I guess I'll have to change brands. Any suggestions from any one?
-
I am stumped but if you have tried 2 motherboards I doubt if that is your problem.
-
I checked the manual and that of a competitor with a similar Intel Mini ITX Form Factor model with same processor.
I also looked at the In Win BP655 mini ITX case. It appears to come with a Haswell Ready 200W power supply.
The competitors manual recommends using a MINIMUM of a 350 watt power supply.
-
I checked the manual and that of a competitor with a similar Intel Mini ITX Form Factor model with same processor.
I also looked at the In Win BP655 mini ITX case. It appears to come with a Haswell Ready 200W power supply.
The competitors manual recommends using a MINIMUM of a 350 watt power supply.
This board supposedly requires only 10 watts. I am pretty sure that is not the issue.