Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Bruce on December 08, 2015, 12:24:49 am
-
Hi All,
I'm building two identical computers, following the Good spec on logicalincrements.com. On both machines, when poweron, I get 1 long beep, two short beeps. I cannot get any video from either the VGA or DVI onboard ports. I read here http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816 that it's a "memory error", but have found nothing more informative. I've reseated the ram, used one stick or two, no change.
Any ideas/insight would be most welcome, as these are christmas gifts for the kids and I still need to get everything installed.
Thanks in advance.
-
Hi there,
sorry to correct you but 1 long beep and two short beeps usually indicate a graphics error. http://forum.giga-byte.co.uk/index.php?topic=2248.0
If you could post back with full hardware details it will be easier to help you. If you're not sure of what information is required check here: http://forum.giga-byte.co.uk/index.php?topic=2195.0
-
GIGABYTE GA-F2A88X-D3H FM2+ / FM2 AMD A88X (Bolton D4) 8 x SATA 6Gb/s USB 3.0 HDMI ATX AMD Motherboard
AMD Athlon X4 860K Kaveri Quad-Core 3.7 GHz Socket FM2+ 95W AD860KXBJABOX Desktop Processor (BLACK EDITION)
HyperX Fury Series 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model HX316C10F/8
SanDisk SSD PLUS 2.5" 120GB SATA Revision 3.0 (6 Gbit/s) Internal Solid State Drive (SSD) SDSSDA-120G-G25
GIGABYTE R7 370 Windforce 1015MHZ 2GB 5.6GHZ GDDR5 2xDVI HDMI DisplayPort PCI-E Video Card (Part#: GV-R737WF2OC-2GD)
EVGA 500B 80 PLUS BRONZE CERTIFIED 500W POWER SUPPLY 120MM FAN 3 YEARS WARRANTY (Part#: 100-B1-0500-KR)
Cooler Master HAF 912 - Mid Tower Computer Case with High Airflow, Supporting up to Six 120mm Fans and USB 3.0
Note that I don't have the graphics card put in, I'm just using the onboard ports so far.
Saw the beep codes here: http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816
So I guess my question is, how can I have a graphics error with the onboard graphics only? And on TWO motherboards.
-
Sadly the problem is that the CPU you have chosen doesn't have a built in GPU: http://www.scan.co.uk/products/amd-athlon-x4-860k-black-edition-kaveri-quad-core-s-fm2plus-37ghz-2mb-x-2-cache-95w-retail which you need to use the on-board graphics ports. As the system is not detecting a graphics chip it is giving you the beep codes.
You will need to add a GPU to both systems for them to work or change to a different processor that has in-built graphics such as this one: http://www.scan.co.uk/products/amd-a8-7670k-black-edition-cpu-with-fan-plus-heatsink-fm2plus-godavari-quad-core-36ghz-radeon-r7-757 which is an A Series APU (Advandced Processing Unit)