Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Halls on January 16, 2016, 10:14:45 pm
-
Hi
I build up a system with a i5-6500 and 4GB RAM from HyperX 4GB FURY DDR3 1866MHz CL11 HX318LC11FB/4
If i put the ram module into the no 2-3-4 ramslot the pc isnt boot up.
I can turn on the pc but the motherboard is not boot up.
If i put the ram into no1 ramslot the board boot up and everything looks fine but after 30-40 min the PC is total freezing out.
I must unplugged the PSU if i want to restart.
I use the processor graphics but the problem is still if i using the video card in the PCI-e slot.
PSU 500W gigabyte superB
Any solution?