Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: arthuro on February 06, 2016, 09:29:44 pm

Title: z170-UD5 TH no signal to monitor (post sound is heard)
Post by: arthuro on February 06, 2016, 09:29:44 pm

Hi
i ve built a brand new system with i7 the gigabyte z170 UD5 TH mobo and a pair of 2400 DDR4.

I was booting ok hearing the post beep sound and then entering bios.
After that, i inserted a (brand new) usb stick with windows so as to install them to my hdd. Both were recognized by bios. Until the installation couldnt continue saying no driver found. So i shut it off to find a solution with the installation. I did another two three restarts and everything went normal.

In my...last attempt i turn it on again, but monitor stays off although i hear the post beep!
The mobo displays "AE" and stays there. I see no signal on monitor and no bios.
It keeps doing it now ... no signal no sign of bios.

i reseatted CPU, left only one DDR4 module and unplugged all USB/SATA devices!

Any advice please?
 :-\

P.S I forgot to mention that i have connected the onboard HDMI via hdmi cable to EIZO DVI monitor using HDMI to DVI adapter... (which works fine between my android TV box and EIZO)

Title: Re: z170-UD5 TH no signal to monitor (post sound is heard)
Post by: shadowsports on February 07, 2016, 12:57:50 am

Have you tried using a different HDMI cable and/or going straight to an HDMI monitor?

They haven't got all the bugs with the MegaChips ironed out.

Integrated Graphics Processor+MegaChips MCDP2800 chip: 1.1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
 * Support for HDMI 2.0 version.