Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: spunky90 on May 27, 2016, 05:29:26 pm

Title: GA-X79-UD3 + E5-2670v1
Post by: spunky90 on May 27, 2016, 05:29:26 pm

Hey Guys,

I have a GA-X79-UD3 and E5-2670v1. However the combo is not booting. It is powering on for a couple of seconds then off 3 times. The board is v1.0 with the default BIOS. I guess I will have to update the bios in order to support the CPU. However I am not sure what CPU I need. Which one is supported by the default bios.

Any suggestions?

Title: Re: GA-X79-UD3 + E5-2670v1
Post by: dmdilks on May 27, 2016, 10:32:50 pm

You need to update the bios to F16 this from the CPU support list from Gigabyte.

Xeon E5-2670   2.60GHz   20MB    Sandy Bridge-EP 32nm C2   130w   100   F16

Plus you will have to do it using a USB flash drive. You can't do using Q-Flash because you are going to another bios Version 2.33

(Note) Please update @BIOS to ver.2.33 and be sure to reflash this BIOS through @BIOS ver 2.33.

(Note) To Support IVB-E CPU, the Intel driver must be updated in advanced.

(Note) 3D BIOS will be no longer support after updating this BIOS.

Title: Re: GA-X79-UD3 + E5-2670v1
Post by: spunky90 on May 28, 2016, 06:08:51 am

Which CPU can be used to boot the computer? Since it is not starting with that one thus I am not able to flash the BIOS...

Title: Re: GA-X79-UD3 + E5-2670v1
Post by: dmdilks on May 29, 2016, 01:36:43 am

A i7-3820 that one will support all version of the bios.