Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Nike on April 16, 2010, 02:26:03 pm

Title: BIOS settings aren't being saved
Post by: Nike on April 16, 2010, 02:26:03 pm

My friend is having an issue with the G31M-S2L board.
The FSB frequency is being switched back to Auto nearly every times he reboots the system.

I have had this problem before and I've seen other boards acting the same, all made by Gigabyte.
I wonder if there's a known solution for this problem.

When I had this problem (P35-DS3L), resetting the BIOS via the jumper (CLR_CMOS) did the trick, but it's not helping my friend with the G31M-S2L.
I should also mention that he even updated his bios to the latest version, yet it didn't help either.

Thanks in advance.
Daniel.

Title: Re: BIOS settings aren't being saved
Post by: absic on April 16, 2010, 04:23:12 pm

Hi,

Have you tried a new mobo battery?

It's the first place I would look if re-setting BIOS didn't work properly.

Title: Re: BIOS settings aren't being saved
Post by: Nike on April 16, 2010, 04:34:24 pm

But not all the settings in the BIOS are being reset. Its only the FSB, it turns to Disabled most times.

Title: Re: BIOS settings aren't being saved
Post by: absic on April 16, 2010, 04:39:15 pm

Could still be due to the battery and by replacing it you eliminate a possible cause.

If the problem still persists then you know there is an issue elsewhere.