Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: sparkyork on April 18, 2010, 07:07:23 pm

Title: update bios on ep41 ud3l from f4 to f5, getting checksum error = 6f00
Post by: sparkyork on April 18, 2010, 07:07:23 pm

as above really just trying to update bios to see if my ram will run, is this a corrupted download or normal?

no info on gigabyte site anyone out there no what this means

cheers

Title: Re: update bios on ep41 ud3l from f4 to f5, getting checksum error = 6f00
Post by: Fatman on April 18, 2010, 10:04:26 pm

sounds like a bad flash..........try downloading the bios file again from the gigabyte site

http://www.gigabyte.com.tw/Support/Motherboard/BIOS_Model.aspx?ProductID=3065&ver=

and use Q-Flash and try flashing your bios again....May not work because you already have a dodgy bios, but give it a shot..

Title: Re: update bios on ep41 ud3l from f4 to f5, getting checksum error = 6f00
Post by: sparkyork on April 18, 2010, 11:09:36 pm

i found something somewhere which seems to mean this is ok so i went on ahead and did it, everything seems ok but then i still cant boot into windows anyway, im running corsair twin 2x2048-6400g or xms2's which ever way you read it!

still no post to winows, any ideas?  all i can see is that on the qvl list it seems to like the same ram but with c4 on the end, can i tweek the timings to make it work, or is this cos of a bad flash that i cant run the memory, it never worked before the flsah but who knows!