Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: buconova on April 30, 2017, 03:28:28 am

Title: GA-H110M-S2H - Setting up the primary video signal/port in the BIOS
Post by: buconova on April 30, 2017, 03:28:28 am

Hello folks


I have a problem as follows.

Is it possible to determine at this motherboard primary port for video signal?

On the VGA port I connected the projector (TV) - Secondary ScreenIn a DVI port, I have connected the monitor - the primary screen.

The problem is multi boot loader because the signal only to the VGA port. The picture is on the secondary display (VGA), which is wrong. I want a picture on the primary display (DVI).

Obviously the default primary VGA port. I would like and need to be the primary DVI port. Do this in the BIOS to set it manually?

Thanks for any help ;)

Me and Uncle Google apologizes for translation, although I believe that we are doing well ;)

Title: Re: GA-H110M-S2H - Setting up the primary video signal/port in the BIOS
Post by: shadowsports on April 30, 2017, 07:35:11 pm

Board supports up to 2 displays only using onboard video.

BIOS > Peripherals > Initial Display Output > IGFX

Chipset > Internal Graphics > (Use either) Auto or Enabled

Sadly, there is no way to specify primary display.  VGA will ALWAYS be primary if a monitor is connected to the D-SUB port.

Title: Re: GA-H110M-S2H - Setting up the primary video signal/port in the BIOS
Post by: buconova on April 30, 2017, 08:12:18 pm

Thank you.

Although I am not satisfied with the reply :)

I silently hoped to be able to define the primary DVI port.

In the meantime, the previous Asus H81 I had the same display is connected, there is a DVI primary.

Weird. It will have to be back to Asus.

Nothing. Thank you and goodbye ;)