Official GIGABYTE Forum
Questions about GIGABYTE products => Graphic cards => Topic started by: rawbin on August 16, 2017, 01:41:28 am
-
Goodnight members,
Just a really short and simple question. If I run System Requirements Lab, it shows that there is only 64mb available for the videocard. Since I have 8gb of ram installed i want to dedicate more memory to my integrated videocard. I thought it woulf be able to adjust these settings in the BIOS, but I simply can't find it.
Gigabyte H61M-D2H-USB3
Intel Core i5-3470
Intel HD Graphics 2500
How Am I able to raise the amount of ram dedicated to the integrated video card.
Thank you in advance!
-
Goodnight members,
Just a really short and simple question. If I run System Requirements Lab, it shows that there is only 64mb available for the videocard. Since I have 8gb of ram installed i want to dedicate more memory to my integrated videocard. I thought it woulf be able to adjust these settings in the BIOS, but I simply can't find it.
Gigabyte H61M-D2H-USB3
Intel Core i5-3470
Intel HD Graphics 2500
How Am I able to raise the amount of ram dedicated to the integrated video card.
Thank you in advance!
So your not using a dedicated GPU ? and you are using the integrated graphics on the CPU?...
If you are trying to dedicate more of your RAM to the integrated graphics than 64MB, then normally within the BIOS you should be able to find (maybe in the Advanced settings) the graphics section, If you see the 64MB within the BIOS, click that and it should show you other amounts you can assign to the graphics engine.
However,... I'm not familiar with that boards BIOS, so I may be incorrect,... on the other hand, the BIOS you have installed may not allow alterations, as I mentioned, I'm unfamiliar with that board and BIOS.
[/size]
[/size]
[/size]Sorry!
-
Under this section (2-5 Advanced Bios Features) of the motherboard manual it states,
On-Chip Frame Buffer Size. Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: 32MB+2MB for GTT ~ 480MB+2MB for GTT. (Default: 64MB+2MB for GTT)
I hope this helps.