Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Lud78 on May 13, 2010, 10:07:28 pm

Title: No signal detected on ga-h55-usb3
Post by: Lud78 on May 13, 2010, 10:07:28 pm

I get no signal detected on my screen all the time with the built in graphic card on this mother board. The case beaps ones and then starts reading the hard drive. After a while hardreset needs a longer hold which indicates windows is loaded. Tried everything:

Changing the place of the rams, just using one ram etc etc
Cleared the cmos
disconnected all drives.
Checked that processor is connected the right way.
Tried both vga and dvi, same result

What do I do? Any help is appriciated.

Title: Re: No signal detected on ga-h55-usb3
Post by: karoug on May 13, 2010, 11:09:33 pm

This can happen with bent pins on the processor chip from the integrated video. If all else fails, check the pins.