Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: ocukace on May 19, 2010, 09:36:09 pm

Title: BIOS issue and P55-UD4P
Post by: ocukace on May 19, 2010, 09:36:09 pm

Hey guys

I have a P55-UD4P motherboard I cannot flash the BIOS as all the flash utils.  DOS/Windows and the BIOS built in one all register a checksum error when trying to update the BIOS and wont install the later revision.

The Current BIOS is showing as D3 in CPU-Z
(http://i406.photobucket.com/albums/pp141/acemodder/Capture-1.jpg)

Any ideas?

Title: Re: BIOS issue and P55-UD4P
Post by: jojodancer on May 23, 2010, 07:54:36 am

Did you update with @BIOS utility?

Title: Re: BIOS issue and P55-UD4P
Post by: Fatman on May 23, 2010, 04:59:26 pm

Don't use @bios to flash, it is waaaaaaay to risky and using that thru windows will more than likely turn your mobo into a shiny doorstop! If your going to flash use qflash. Here is a link that will teach you how to flash this way


http://forums.tweaktown.com/f69/bios-flashing-how-qflash-guide-27576/

Title: Re: BIOS issue and P55-UD4P
Post by: ocukace on May 24, 2010, 08:05:33 pm

I know how to flash the BIOS using the BIOS flash util, but the program checks the BIOS file to ensure it's correct, but it fails the checksum error.

I have a feeling that it maybe due to the board being a pre-production model?

But not sure.