Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: draco on May 28, 2010, 03:55:16 am

Title: p55m-UD2 not posting/no beep codes
Post by: draco on May 28, 2010, 03:55:16 am

 ::) here we go again

http://www.newegg.com/Product/ComboBundleDetails.aspx?ItemList=Combo.391813

theres the combo i bought

assembled everything, powered on, lights and fans turn on, hard drive spins, the DVD spins up...no post, no codes, not even a beep. nothing happens with the monitor until you power the system off, only then the monitor wakes up from sleep mode

i check all my connections, i tried using only one RAM stick, then both sticks in different slots, then the other single stick in every slot...no change

any more ideas?

Title: Re: p55m-UD2 not posting/no beep codes
Post by: slybunda on July 04, 2010, 01:27:51 pm

ur link not working.

Title: Re: p55m-UD2 not posting/no beep codes
Post by: absic on July 04, 2010, 01:34:01 pm

Correct, link is dead and says that the Combi deal is no longer available. Nice try though.  ;)

Could you post a few more details.....

in the mean time I assume you have tried the basics.......
There is a speaker attached to the Mobo so that you can hear any POST beeps?
You have connected all the power cables to the motherboard and, if necessary the graphics card?
You have double checked that everything is seated properly in the correct slots?
Your PSU has enough power to drive the full system?

Title: Re: p55m-UD2 not posting/no beep codes
Post by: Dark Mantis on July 04, 2010, 02:02:49 pm

Yes, not a lot to go on really ??? world's shortest post?

Title: Re: p55m-UD2 not posting/no beep codes
Post by: muliyul on August 06, 2010, 05:53:21 pm

do you have a pc speaker connected/onboard? make sure its plugged in the right pins on the mobo.
It'd help if you'd supply us with specs.