Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: dvdevil on June 06, 2010, 04:40:36 pm

Title: ga-p55-usb3 no signal
Post by: dvdevil on June 06, 2010, 04:40:36 pm

Help please the ga-p55-usn3 wont boot anymore, the bios boot stops with NO SIGNAL.
Video card replaced no effect.
Sometimes it wil start by chancing dvi to hdmi.

Title: Re: ga-p55-usb3 no signal
Post by: Dark Mantis on June 06, 2010, 08:09:26 pm

It may be that your motherboard battery has died, in which case it is just a matter of replacing it. It should be a CR2032 button cell. If on the other hand it isn't that I would try disconnecting the mains cable and removing the battery and then resetting the CMOS. Leave the battery out and change the jumper for at least 10 seconds and then replace the jumper to its default position and refit the battery. You can then boot the machine and redo your bios settings.

Title: Re: ga-p55-usb3 no signal
Post by: dvdevil on June 06, 2010, 09:26:22 pm

Thanks gonna try it.

Title: Re: ga-p55-usb3 no signal
Post by: dvdevil on June 07, 2010, 01:30:42 pm

its not helping, sometimes it starts up but mostly not.

Title: Re: ga-p55-usb3 no signal
Post by: Fatman on June 07, 2010, 01:33:57 pm

Reseat your GPU and your ram see if that has any luck.

Title: Re: ga-p55-usb3 no signal
Post by: Dark Mantis on June 07, 2010, 01:45:26 pm

On one of the occasions that you can get it to start try and update the graphics card drivers.