Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: wgizmo on June 12, 2010, 04:09:09 pm

Title: GA-890GPA-UD3H rev.1 and 2xRaid0 question!
Post by: wgizmo on June 12, 2010, 04:09:09 pm

Can i do on this mobo 2xhdd Raid0 and 2xssd Raid0? If yes then how to connect them?

Title: Re: GA-890GPA-UD3H rev.1 and 2xRaid0 question!
Post by: bofh1971 on June 12, 2010, 06:18:47 pm

pair up your drives into ports (I usually label them up)
then select drives in the raid configuration menu in bios or just after bios screen on bootup
and put two drives into each raid array you want to configure

should work fine on any board that has enough ports

good luck