Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Panjera on July 15, 2010, 04:00:02 pm

Title: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Panjera on July 15, 2010, 04:00:02 pm: Hi guys, I had a thorough browse but didnt see a fix to the problem i am experiencing so i made a new topic, apologies in advance if i missed a relevant thread.

I have been running a Q6600 (go stepping) on a Asus P5N32-E-SLI plus for a couple of years now, i am not into overclocking and have always ran my rig at stock speeds and voltages. Earlier this week my pc died mid use and on trying to reboot i found it wouldnt post, on changing some ram around i found 1 of the ram slots (slot 1) had died completely. I figured i would buy myself a new mobo and opted for the GA-EP45-UD3LR on the advice of afew forums i searched.

I have fitted my new mobo this morning but i am having difficulty in getting this to go into the BIOS, it makes the single beep, the lights flick on and off on my keyboard but then it hangs on the splash screen indefinately. I am using the 1.1 revision of the board, an Intel Q6600 Go stepping version with an Arctic Freezer pro 7 rev2 HSF, 2x2GB DDR2 800 OCZ ram (2.1v), Nvidia 8800gt and an 850w PSU.

I have tried some basics to get this working including:

trying 1 stick of the OCZ DDR2 800 RAM in all the slots
trying different single sticks of lower voltage (1.8v Elixir 1gb sticks) in all the slots
trying a different (albeit only 400 watt) PSU
trying a ps2 keyboard instead of my USB
trying to boot with only the CPU, HSF, single stick of ram and video card connected
trying all of the above both in and out of my case incase of shorting

I have had no joy with any of the above steps and they all result in a hang at the splash screen. I was hoping someone may have had this issue before or possibly reccomend any further steps to try, unfortunately i do not have access to a second CPU for testing.

It may also be worth noting that the phase led's are indicating:

1 green
2 green
3 orange
4 red

Many thanks for your time guys

Panj
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Dark Mantis on July 15, 2010, 04:16:51 pm: First clear the CMOS as described in our FAQ section. Then try rebooting into the BIOS. I suspect that it maybe a memory problem but one thing at a time.
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Panjera on July 15, 2010, 04:34:56 pm: Hi Dark Mantis and thanks for the speedy reply.

I cleared the cmos, and on trying to power on afterwards the fans started spinning then the pc shutdown and then restarted again. I'm unsure if this is normal behaviour for a Gigabyte board or any board with a dual bios as this is the first i have owned of either. After it had restarted it still hung at the splash screen unfortunately.

Cheers

Panj
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Dark Mantis on July 15, 2010, 04:39:47 pm: Well next we need a complete rundown of your hardware please.
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Panjera on July 15, 2010, 04:52:57 pm: Sure no problem:

Alphapower 850w ATX PSU
GA-EP45-UD3LR rev 1.1
Intel Q6600 Go step
Nvidia Xpert Vision 8800gt 1024MB ddr3
Standard ps/2 keyboard OR Logitech G15 USB Keyboard
OCZ DDR2 PC2-6400 / 800MHz / NVIDIA SLI-Ready Edition / 4GB (2x2048) Kit (pn ocz2n800sr4gk) OR Elixir 2GB (2x1024MB) DDR2 PC6400 800MHz Dual Channel Kit (pn M2Y1G64TU8HBOB-25C)
Microsoft Sidewinder USB mouse (not connected)
Samsung 500 gb Sata 2 HDD (brand new/not connected)
Sony Sata DVDRW (not connected)
LG W2261V Monitor

Cheers
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Dark Mantis on July 15, 2010, 04:55:46 pm: Just to save me time have you checked your memory on the Gigabyte QVL? and the OCZ QVL?
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Panjera on July 15, 2010, 04:58:31 pm: I did try to check but i am getting a 404 error on the gigabyte page for the specific motherboard ???

http://www.gigabyte.tw/FileList/MemorySupport/motherboard_memory_ga-ep45-ud3lr.pdf
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Dark Mantis on July 15, 2010, 05:26:52 pm: Try this: http://www.gigabyte.com/support-downloads/download-center.aspx?kw=GA-EP45-UD3LR+
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Panjera on July 15, 2010, 05:59:16 pm: Ouch, it seems neither of the sets i have are on the QVL. It maybe time to send it back and replace it with another Asus :(

Thanks very much for your help DM , it is very much appreciated.

Panj
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Dark Mantis on July 15, 2010, 06:03:05 pm: Before you do that, just because they are not on Gigabytes QVL just means that they haven't certified them as tested OK. Have you checked on the manufacturers website to see if they list the Gigabyte board as ok?
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Panjera on July 15, 2010, 06:19:31 pm: Thanks for the reply DM, Ive had a look through the lists and it seems every type of Elixir memory bar mine is supported (sods law huh) as for OCZ im having trouble locating an official QVL but on the OCZ forums they seem to be on very little QVL's and no mention of this motherboard so i guess im out of luck.

Cheers for your time :)

Panj
Title: Re: GA-EP45-UD3LR rev1.1 Can't get to bios
Post by: Dark Mantis on July 16, 2010, 08:00:42 pm: Just for the record, panj just pm me and told me it was the CPU after all. He tried it in a friends machine and the same happened there.