Official GIGABYTE Forum

Questions about GIGABYTE products => Graphic cards => Topic started by: hanswurst on February 03, 2025, 11:56:19 pm

Title: 3060 TI aorus Elite - liquid metal - heatsink around copper pipes aluminum or no
Post by: hanswurst on February 03, 2025, 11:56:19 pm

Hello,

I want to apply liquid metal to the aoeus elite 3060ti. Is the area around the copper heat pipes made out of aluminum, or nickel?

Thx

https://youtu.be/W6UcH6NorsY

Minute 0:53

Title: Re: 3060 TI aorus Elite - liquid metal - heatsink around copper pipes aluminum or no
Post by: shadowsports on February 07, 2025, 03:32:49 pm

Greetings,
If you are referring to the pipes where the fins are located, they are aluminum.  I'm all for replacing the thermal pads after you take things apart.  Make sure you purchase the correct thickness.  (probably 1-2mm).  New heat paste on the GPU is also good.  Clean first, remove all residue.  Apply an adequate amount of new paste > sparingly.  Too little can create hot spots, too much can affect heat dissipation and transfer.   

As far as adding liquid metal.  That I would not do.  ;)