Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: F5BJR on August 09, 2010, 06:18:50 pm

Title: GA-X58A-UD5 if you have problem with first PCIe X1
Post by: F5BJR on August 09, 2010, 06:18:50 pm

*
GA-X58A-UD5 if you have problem with first PCIe X1

http://www.orbitmicro.com/global/pexp1-sx-p-749.html

exist sure similar products

fine , if you have a card too long which does not fall because of a chipset  

Ok with my H727 avermedia

I used a column more than 2 .2 cms with a screw to secure the card because it is now higher

Pierre

Title: Re: GA-X58A-UD5 if you have problem with first PCIe X1
Post by: nexus on September 25, 2010, 11:49:52 am

Put the PCI-E x1 card in a PCI-E 2.0 (x16) slot - tell me if it works please

Title: Re: GA-X58A-UD5 if you have problem with first PCIe X1
Post by: Dark Mantis on September 25, 2010, 11:52:38 am

Hi and welcome to the forum. Would you mind updating your profile which can be found at the top with your location please. It can make it easier to answer if we know where the poster is.

In theory any PCIE card will work in any slot it physically fits in.

Title: Re: GA-X58A-UD5 if you have problem with first PCIe X1
Post by: F5BJR on September 25, 2010, 05:33:50 pm

*
This adapter is for use PCI-e X1 card in PCI-e X1 slot blocked by Chipset as for my GA-X58A-UD5

Look first PCI-e X1 SLOT at right of this

(http://www.pcshop-ch.com/images/125782.jpg)

Pierre