Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: dealcorn on August 27, 2010, 06:58:33 am

Title: GA-D510UP Hangs During or After DMI Poool Check
Post by: dealcorn on August 27, 2010, 06:58:33 am

After working surprisingly well for several days, my new GA-D510UD hung first during its check of DMI pool data then immediately after when I swapped the DRAM.  I am running the F4 (current) version of the BIOS.  I read other suggestions that the chipset driver be updated but as this is loaded at boot in Linux I do not understand this approach as a promising solution.  I am comfortable that linux is not a supported operating system, but I need to sort out this issue before any O/S can be installed.   Most likely unrelated, my first issue arose after a failed attempt to install lvm on software raid5 (mdadm).  Are there any suggestions to enable this board load an O/S.  I like this board very much but it needs  an operating system.

Title: Re: GA-D510UP Hangs During or After DMI Poool Check
Post by: Dark Mantis on August 27, 2010, 08:39:26 am

This problem has arisen before and if memory serves me well it was fixed by clearing the CMOS. Something to do with leftover settings from the factory. Anyway worth a try.  ;)