Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: El Scheleto on September 13, 2010, 07:38:13 am

Title: GA-MA 770T - UD3P with F11C BIOS have some problems with Ram timing
Post by: El Scheleto on September 13, 2010, 07:38:13 am

Hi! This is my  first Gigabyte Topic.
My GA-MA 770T - UD3P work fine from F3-F10 BIOS with this setting
AMD Athlon X3 440@X4x3750Mhz(250x15) and for RAM memory Kingstone Value Ram 1333-9-9-9-24@1666-8-8-8-20 1T dual chanel ,and 2500MHz for NB,  HT
Flashing new F11C BIOS Ram work only at 1666-11-11-11-30.Why???
Tank-you and sorry for my bad english!

Title: Re: GA-MA 770T - UD3P with F11C BIOS have some problems with Ram timing
Post by: Dark Mantis on September 13, 2010, 08:42:41 am

Hi and welcome to the forum. I think that maybe you made a  typing error in your post. Did you mean 1066 for the memory speed?

Title: Re: GA-MA 770T - UD3P with F11C BIOS have some problems with Ram timing
Post by: El Scheleto on September 13, 2010, 09:15:36 am

No 1666

Title: Re: GA-MA 770T - UD3P with F11C BIOS have some problems with Ram timing
Post by: absic on September 13, 2010, 10:23:56 am

It could be due to the fact that the F11C is beta BIOS and although such releases are generally stable, sometimes things get missed prior to the final release.

If the tighter timings are essential to you, with your rather impressive Overclock, I would suggest that you revert to one of the earlier BIOS releases that will allow you to obtain them or wait until the final F11 BIOS version is released.