Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: markis on October 02, 2010, 07:24:46 pm
-
Hi all, I've just built a new PC with a GA-X58A-UD3R version 2 MOBO. Now when i switch everything on and put my Windows 7 disc in my DVD ROM/CD-Drive ,the BIOS appears on the screen and then it stops at CD-DVD ROM.. and then appears to run on a black screen with a white line that stops after about 1 minute, then my PC just shuts down. What am I missing or doing wrong ?
Thanks
Markis
-
Well possibly you haven't set the BIOS up to boot from the optical drive or the drive is not connected properly. I would suggest checking all the cables to the drive and motherboard first.
Can you list all your hardware in detail please and we might have a better idea. ;)
-
Hi Mantis thanks for the reply. Ok have been into the BIOS and got it to boot from DVD-ROM drive, but problem still persists and it justs cuts out and PC power goes off altogether. Have looked inside and double checked all my leads and connections and everything seems ok. Here's my hardware.
Lian Li PC-8NB Midi Case
Gigabyte GA-X58A-UD3R intel X58 (socket 1366) Motherboard
Intel Core i7 950 3.06GHz(Bloomfield) (Socket LGA 1366)-Retail
OCZ Gold Low Voltage 6GB (3x2GB) DDR3 PC3-16000C10 2000MHz Triple Channel
Sapphire ATI Radeon HD 5770 1024MB GDDR5 PCI- Express Graphics Card
Western Digital Caviar 1TB Sata 6Gbs 64MB Cache OEM
Antec TruePower New Modular 650W Power Supply
Samsung 8x BluRay ROM 16xDVD RW Drive
Windows 7 home premium 64-Bit-OEm.
-
OK now we have a better idea of what we are dealing with. Pull all the connections off everything power and data. Leave just the motherboard with CPU/heatsink/fan, one RAM module in the first slot, buzzer and PSU connected. Now try and boot. It will fail of course but it should give you a series of beeps. Post them here.
-
Have tried what you said. First of all I'm not getting any 'beeps' so there's a sound issue configuration wrong somewhere even when I connect a pair of speakers-but hey maybe I'm connecting them wrong I am new to all of this.
-
Yes I am afraid that you are. The speaker/buzzer for the BIOS beeps is connected to the FPH( Front Panel Header) There is a row of pins there that are for the speaker. If you check the manual it is shown on page 30
http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-x58a-ud3r_v2.0_e.pdf
They are the last four pins on the top right . Only the two outside ones are used.
-
Right had a look in PC at F-Panel and this is what i've got connected starting from bottom row left:
HDD LED (2 pin) orange/white wires put in first two pins bottom left.
RESET SW (2 pins) blue/white wires put in the third and fourth pins bottom left.
POWER SW (2 pins) grey/white wires third and fourth pins on top row left
POWER LED (three pins) bottom row last three pins.
So either i have got these wrong ,because I can't find any other wires in my Lian-Li case.
-
You probably haven't got a buzzer/speaker connected. In the top right of the box that you are looking at F_Panel there are four pins the two outside ones are for attaching a speaker/buzzer. You can buy one for about a pound. I would recommend a buzzer as it is easier to fit but your choice.
-
Hi Mantis, connected buzzer to speaker,put Windows disc in ROM drive to boot from, got "one beep" then a minute or so later PC shuts down completely.
-
Have you still got it built up like I suggested, just the basics?
-
Ok have it like you suggested,got a prolonged beeeeep,PC was running then after approx 3 minutes shut itself down.
-
Prolonged beep. Would that be more than about 0.5 seconds?
-
Yes, I'm wondering if its the processor that could be causing it to switch itself off.
-
Ok then. It shouldn't do that. So we need to go to the next stage which is building the system outside of the case. That way we can be sure that there are not any shorts etc.
Make sure that you observe anti-static precautions.
Lay some cardboard or something similar that is non-conductive on the worktop and remove the motherboard/CPU/heatsink/fan/buzzer/one stick of memory and PSU from the case and put it on the cardboard. Now I know you haven't got any graphics but try and boot. The system should try and then fail emitting a series of beeps. Please post what sounds it makes.
Yes, I'm wondering if its the processor that could be causing it to switch itself off
Possibly but not necessarily. That is what we are going to determine.
-
Please take an image of the screen you are seeing, with the white line on it, then post it here.
Sounds like it might be the install screen starting, so just would like to be sure.
One beep means it started correctly, and has posted past the BIOS and handed things over to the CD or hard drive. Are you sure your install DVD works? What ports do you have your hard drives connected to (Color and #), and what BIOS settings do you have set for the following
Integrated Peripherals
X58
Intel Controller (Blue Ports)
eXtreme Hard Drive (Intel ICH10R Chipset) ........................
ICH SATA Control Mode (Intel ICH10R Chipset) .....................
SATA Port0-3 Native Mode (Intel ICH10R South Bridge) .............
Gigabyte/J.Micron Controller (White Ports 8/9)
Onboard SATA/IDE Device (GIGABYTE SATA2 Chip) .............
Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip) ...........
-
One beep means it started correctly, and has posted past the BIOS and handed things over to the CD or hard drive. Are you sure your install DVD works? What ports do you have your hard drives connected to (Color and #), and what BIOS settings do you have set for the following
Lsdmeasap the one beep referred to is a prolonged beep also there is no GPU installed so it wouldn't do a confirm booting beep anyway. It has to fail with no GPU. I must admit I did jump to that conclusion at first too.
-
Right today I got Windows 7 installed Hooray :) I disconnected everything again, took the Motherboard out of the case and double checked the Heatsink on the CPU and what I found was that one of the push pins was not completely through (you can check this by looking under the Motherboard), I'm talking here about 1- 2 mm, but it seems it was enough to cause the CPU to shut down my PC. Anyway BIG THANKS Dark Mantis for your help and advice.
-
You are more than welcome! It is just good to be able to help and put the experience to good use. Have fun with your new toy and don't forget where the forum is. ;)
-
Ahh great to see you found the problem!
Thanks for the heads up on that DM, if I would have noticed it was that instead of the normal beep I would have been able to tell him what it was (CPU Overheat).
Need to pay better attention ;D
-
No problem Lsdameasap. I do the same thing sometimes ;D