Official GIGABYTE Forum
Questions about GIGABYTE products => Thermal cooling solution & chassis => Topic started by: Excalibur1976 on October 28, 2010, 11:18:53 am
-
Hi all i'm planning on water cooling my gigabyte ma785gmt-ud2h matx board but finding it hard to find the south/north/mos blocks i have found these http://specialtech.co.uk/spshop/customer/product.php?productid=12150 (http://specialtech.co.uk/spshop/customer/product.php?productid=12150)that look like they will fit and it says for g board but the company say they wont probabley after looking at coolingconfigurator.com so thought i would ask you guys here are the specs i found on them
Specifications:
•North Bridge Cooler
Dimensions: 71.3 x 13.5 x 43 mm (WxHxD)
Dimensions (cooling): 39.8 x 8 x 39.8 mm (WxHxD)
Spacing of the mounting holes: 74.6 mm
Center hole spacing of the connections: 21.5 mm
•South Bridge Cooler
Dimensions: 52.2 x 13.5 x 45.9 mm (WxHxD)
Dimensions (cooling): 39.8 x 8 x 39.8 mm (WxHxD)
Spacing of the mounting holes: 50.2 mm
Center hole spacing of the connections: 21.5 mm
•Voltage regulator cooler
Dimensions: 97.1 x 24 x 17.8 mm (WxHxD)
Dimensions (cooling): 95.1 x 10.7 x 15 mm (WxHxD)
Spacing of the mounting holes: 89.4 mm
Center hole spacing of the connections: 59.1 mm
-
Hi and welcome to the Gigabyte Forum.
The board you are talking about cooling is an AMD one and so outside my sphere of knowledge really but I can recommend that you also check out this reteiler as they stock a lot of different blocks etc also.
https://www.aquatuning.co.uk/index.php/XTCsid/j1828s6ev57adva8v1nn0t2vvacjbstj